I was tired of my computer taking up valuable desk space, and could not find any decent holders to my computer to have under the desk, and the desk being a adjustable desk, leaving it on the floor was not an option. So i decided to make one myself. With few materials, and pretty cheap.
And the best part is that i think it looks better than most you can buy, and is more sturdy.
Also it is still easy to access the computer if you side ever need to come off.
4 Pieces of 2020 black Aluminum extrusion 50 cm
https://amzn.to/3KJ4l8L
Pack of 90 degree angles connectors, i used 4 total.
https://amzn.to/3ksJtrN
1 wood plate, i choose Oak, measuring 30 cm x 55 cm (But you can of course use whatever you want)
4 M6 Bolts
The tools i used was a Table saw to cut the plate, and some sandpaper to smooth out the edges. i then used a drill press to drill the holes through the plate in each corner, and a bigger drill to countersink the holes.
I then tapped to end of the aluminum profiles with m6 tread.
And last screw it all together, and attached the 90 angle connectors in the top so i could screw the under my desk.